2
Technical Explanation > DCM > Import/Export by Service Mode (External) > Export Procedure
5) Confirm that "*" is displayed on the right side of the selected file, and press [->].
1 1
3 3
6) Select [PASSWD], enter the password, and press [OK].
1 1
2 2
Note:
"<-" is displayed on the right side of the file to indicate that the selection of the file has
been confirmed.
"***" is displayed after the password is entered.
2
Technical Explanation > DCM > Import/Export by Service Mode (External) > Export Procedure
2 2
F-2-232
3 3
4 4
F-2-233
Note:
You can select [REPLACE] to import a file exported from another machine as a file
exported from this machine.
The following items are imported.
•
Preferences > Network > TCP/IP Settings > IPv4 Settings > IP Address Settings > IP
Address
•
Preferences > Network > TCP/IP Settings > IPv6 Settings > Manual Address Settings
•
Preferences > Network > TCP/IP Settings > DNS Settings > DNS Host/Domain Name
Settings
•
Preferences > Network > AppleTalk Settings
•
Function Settings > Send > E-Mail/I-Fax Settings > Communication Settings > E-Mail
Address
•
Function Settings > Send > E-Mail/I-Fax Settings > Communication Settings > POP Login
Name
•
Function Settings > Send > E-Mail/I-Fax Settings > Communication Settings > POP
Pssword
•
Function Settings > Send > Fax Settings > Set Line > Line n > Register Unit Telephone
Number
•
Function Settings > Send > Fax Settings > Set Line > Line n > Register Unit Telephone
Number > ISDN Subaddress
•
Function Settings > Send > Fax Settings > Set Line > Register Unit Name
•
Management Settings > Device Management > Device Information Settings
7) Select [RESTORE] and press [OK] to execute the import process.
1 1
2-165
3 3
2 2
F-2-234
2-165