Canon imageRUNNER ADVANCE C3325 Series Service Manual page 732

COPIER>OPTION>USER
CNT-SW Set default dspl items on charge counter
Lv.1 Details To set default display items of the charge counter on the Counter
Check screen.
For details of each type, refer to the Service Manual.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Type 1, 1: Type 2
Default value 0
Related service mode COPIER> OPTION> FNC-SW> CONFIG
PRJOB-CP ON/OFF of count TX at RX/report print
Lv.2 Details To set whether to enable/disable a page-basis count pulse
transmission to the charge management device at the time of RX print
or report print.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo Charge management device: Coin Manager, Non-Canon-made control
card
DFLT-CPY Setting of color mode for copy
Lv.1 Details To set the default color mode for copy operation.
To reflect the change, it is necessary to initialize the default settings of
copy function in one of the following two ways.
- Settings/Registration> Function Settings> Copy> Change Default
Settings > Initialize
- Main Menu> Copy> Logo icon in upper right of the screen> Change
Default Settings> Initialize
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Initialize the default settings of copy function.
Caution Be sure to initialize the default settings of copy function after change.
Display/adj/set range 0 to 2
0: Based on Auto/ACS/Printer Driver settings, 1: Color mode, 2: Black
mode
Default value JP:2, USA:0, EUR:2, AU:0, CN:0, KR:0, TW:0, ASIA:0
Related user mode Function Settings> Copy> Change Default Settings> Initialize
Function Settings> Copy> Select Color Settings for Copy> Use Auto
(Color/Black & White)
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER>OPTION>USER
DFLT-BOX Setting of color mode for Mail Box scan
Lv.1 Details To set the default color mode for Mail Box scan operation.
To reflect the change, it is necessary to initialize the default settings of
scan and store function in one of the following two ways.
- Settings/Registration> Function Settings> Store/Access Files>
Common Settings> Scan and Store Settings/Access Stored Files
Settings> Change Default Settings> Initialize
- Main Menu> Scan and Store> Mail Box> (Box number)> Scan>
Logo icon in upper right of the screen> Change Default Settings>
Initialize
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Initialize the default settings of scan and store function.
Caution Be sure to initialize the default settings of scan and store function after
change.
Display/adj/set range 0 to 2
0: Based on Auto/ACS settings, 1: Color mode, 2: Black mode
Default value 0
Related user mode Function Settings> Store/Access Files> Common Settings> Scan
and Store Settings/Access Stored Files Settings> Change Default
Settings> Initialize
DOC-REM ON/OFF of original removal message
Lv.1 Details To set whether to display the message to remove original when
scanning with DADF without opening/closing DADF after scanning with
the Copyboard.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
DPT-ID-7 Set password entry at dept ID reg/auth
Lv.2 Details To set whether to enter a password at the time of registration/
authentication of department ID.
With 1 is set, entry of 7-digit password is required beside department
ID.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Department ID only, 1: 7-digit (password) entry
Default value 0
8-181
8-181