Canon imageRUNNER ADVANCE C3325 Series Service Manual page 740

COPIER>OPTION>USER
JA-JDF Setting of JDF: SAM
Lv.2 Details To set whether to allow the use of JDF when iW SAM is enabled.
Use case When canceling the operation restriction while iW SAM is enabled
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Prohibited, 1: Allowed
Default value 0
JA-RUI Setting of Inbox document access: SAM
Lv.2 Details To set whether to allow accessing to Inbox document from remote UI
when iW SAM is enabled.
Use case When canceling the operation restriction while iW SAM is enabled
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Prohibited, 1: Allowed
Default value 0
JA-WEB Setting of Inbox document upload: SAM
Lv.2 Details To set whether to allow uploading of Inbox document with the Web
browser when iW SAM is enabled.
Use case When canceling the operation restriction while iW SAM is enabled
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Prohibited, 1: Allowed
Default value 0
EXP-CRYP ON/OFF confdntial encrypt: add book exp
Lv.1 Details To set whether to encrypt the confidential part (password part) in the
Address Book when exporting the address book and device settings
via remote UI.
Use case When there is a need to export password without encryption because
of operation and tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution In principle, be sure not to allow the user to execute export without
encryption because of security concern. Be sure to get approval from
the user in advance by telling that the security level decreases when 0
is set.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION > CST
8 Service Mode > COPIER > OPTION > CST
COPIER>OPTION>USER
SMD-EXPT ON/OFF remote UI service mode data dspl
Lv.1 Details To set whether to display "service mode data" as the target data of
export on remote UI.
When 1 is set, the same service mode data can be registered in the
case of installing more than a machine at the same time.
Use case When installing more than a machine at the same time
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
SNDSTREN Set of setting delete aftr scan and send
Lv.1 Details To set whether to delete the transmission setting/address after
transmission on the "Scan and Send" screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Deleted, 1: Retained only the transmission setting, 2: Retained the
transmission setting and address
Default value JP:1, USA:0, EUR:0, AU:0, CN:0, KR:0, TW:0, ASIA:0
FAXSTREN Set of setting delete aftr fax transmit
Lv.1 Details To set whether to delete the transmission settings except for the
address after transmission from the "Fax" screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Deleted, 1: Retained
Default value JP:1, USA:0, EUR:0, AU:0, CN:0, KR:0, TW:0, ASIA:0
SJ-UNMSK ON/OFF secured job masking cancellation
Lv.2 Details To set whether to mask other people's secured jobs.
When 0 is set, operation of other people's secured jobs is not possible
because they are masked.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Masking is
canceled and other people's secured jobs can be operated.
It is enabled at MEAP authentication.
Use case When operating secured jobs in charge mode Type-C
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF (Masking enabled), 1: ON (Masking canceled)
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
8-189
8-189