Canon imageRUNNER ADVANCE C3325 Series Service Manual page 647

COPIER>ADJUST>HV-TR
TR-DUP9 Sec trn indiv set clr mod/fd side: set 9
Lv.2 Details To set the color mode and feed side for setting 9.
Setting 9 is the combination condition of environment, paper type (paper
weight), color mode/feed side that are set in TR-ENV9, TR-PPR9 and
TR-DUP9. When this condition is satisfied, the paper allotted voltage
adjusted in TR-VL9 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right
digit represents the feed side.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/
black mode (leading edge of paper), 4: Color/black mode (trailing edge
of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 11
Related service mode COPIER> ADJUST> HV-TR> TR-ENV9, TR-PPR9, TR-VL9, 2TR-OFF
Supplement/memo Up to 16 combination patterns can be set in TR-VL1 to 16 (setting
1 to 16). When there is more than one setting where all conditions
(environment, paper type and color mode/feed side) are the same, the
setting with a smaller setting number is applied.
TR-DUP10 Sec trn indiv set clr mod/fd side:set 10
Lv.2 Details To set the color mode and feed side for setting 10.
Setting 10 is the combination condition of environment, paper type (paper
weight), color mode/feed side that are set in TR-ENV10, TR-PPR10 and
TR-DUP10. When this condition is satisfied, the paper allotted voltage
adjusted in TR-VL10 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right
digit represents the feed side.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/
black mode (leading edge of paper), 4: Color/black mode (trailing edge
of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 11
Related service mode COPIER> ADJUST> HV-TR> TR-ENV10, TR-PPR10, TR-VL10, 2TR-
OFF
Supplement/memo Up to 16 combination patterns can be set in TR-VL1 to 16 (setting
1 to 16). When there is more than one setting where all conditions
(environment, paper type and color mode/feed side) are the same, the
setting with a smaller setting number is applied.
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER>ADJUST>HV-TR
TR-DUP11 Sec trn indiv set clr mod/fd side:set 11
Lv.2 Details To set the color mode and feed side for setting 11.
Setting 11 is the combination condition of environment, paper type (paper
weight), color mode/feed side that are set in TR-ENV11, TR-PPR11 and
TR-DUP11. When this condition is satisfied, the paper allotted voltage
adjusted in TR-VL11 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right
digit represents the feed side.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/
black mode (leading edge of paper), 4: Color/black mode (trailing edge
of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 11
Related service mode COPIER> ADJUST> HV-TR> TR-ENV11, TR-PPR11, TR-VL11, 2TR-OFF
Supplement/memo
Up to 16 combination patterns can be set in TR-VL1 to 16 (setting
1 to 16). When there is more than one setting where all conditions
(environment, paper type and color mode/feed side) are the same, the
setting with a smaller setting number is applied.
TR-DUP12 Sec trn indiv set clr mod/fd side:set 12
Lv.2 Details To set the color mode and feed side for setting 12.
Setting 12 is the combination condition of environment, paper type (paper
weight), color mode/feed side that are set in TR-ENV12, TR-PPR12 and
TR-DUP12. When this condition is satisfied, the paper allotted voltage
adjusted in TR-VL12 is applied at the time of secondary transfer.
The left digit of the setting value represents the color mode and the right
digit represents the feed side.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 11 to 43
Left digit (color mode)
1: Color mode (entire paper), 2: Black mode (entire paper), 3: Color/
black mode (leading edge of paper), 4: Color/black mode (trailing edge
of paper)
Right digit (feed side)
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 11
Related service mode COPIER> ADJUST> HV-TR> TR-ENV12, TR-PPR12, TR-VL12, 2TR-
OFF
Supplement/memo Up to 16 combination patterns can be set in TR-VL1 to 16 (setting
1 to 16). When there is more than one setting where all conditions
(environment, paper type and color mode/feed side) are the same, the
setting with a smaller setting number is applied.
8-96
8-96