Canon imageRUNNER ADVANCE C3325 Series Service Manual page 883

15)
2x
16) Remove the covers of the 4 Cord Guides, and affix the Cord Guides to the position
as shown in the figure.
17) Put the Speaker Cable through the Cord Guides and install the 4 covers of the
guides.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover
4x
9
Installation > Voice Guidance Kit-F2 / Voice Guidance Connection Kit for iR-ADV C3300 series > Installation Procedure > Routing the Cable (when
■ Routing the Cable (when installing this equipment and other
● For Copy Card Reader-F1 and Voice Guidance-F2.
1. Securing the Cable of the Voice Guidance
2. Securing the Cable of the Copy Card Reader
F-9-234
Reader Cable Cover
Exhaust Outlet
F-9-235
9 Installation > Voice Guidance Kit-F2 / Voice Guidance Connection Kit for iR-ADV C3300 series > Installation Procedure > Routing the Cable (when
options simultaneously)
1) Remove the covers of the 4 Cord Guides, and affix the Cord Guides to the position as
shown in the figure.
2) Insert only the Speaker Cable through the 4 Cord Guides.
3) tall the 4 Cord Guide Covers.
1) Remove the covers of the 2 Cord Guides, and affix the Cord Guides to the position as
shown in the figure.(Use the Cord Guides (thick) included with the Copy Card Reader.)
2) Remove the Face Seal, and install the Wire Saddle. (included with the Copy Card
Reader).
3) Fold the Copy Card Reader Cable at the [A] part, and insert only the Copy Card
Reader Cable through the 2 Cord Guides and then secure it in place with the Wire
Saddle.
4) Install the 2 Cord Guide Covers.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover.
Wire Saddle
7x
9-95
Reader Cable Cover
[A]
[B]
Exhaust Outlet
F-9-236
9-95