Canon imageRUNNER ADVANCE C3325 Series Service Manual page 676

COPIER>FUNCTION>CLEAR
ERDS-DAT Initialization of E-RDS SRAM data
Lv.1 Details To initialize the SCM value of the Embedded-RDS stored in the SRAM.
SCM values are ON/OFF of E-RDS, server's port number, server's
SOAP URL, and communication schedule with the server (how often
the data is acquired), etc.
The value set by COPIER> FUNCTION> INSTALL> E-RDS, RGW-
PORT, RGW-ADR, COM-LOG is cleared.
Use case When upgrading the Bootable in the E-RDS environment
Adj/set/operate method Select the item, and then press OK key.
Caution Usage of the SRAM in E-RDS differs depending on the Bootable
version. Therefore, unless the SRAM data is cleared at the time of
version upgrade, data inconsistency occurs.
Display/adj/set range At normal state: OK, At failure occurrence: NG
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, RGW-ADR,
COM-LOG
REG-CLR Clear of image position correction value
Lv.2 Details To clear the correction value when the value which is adjusted by
image position correction control is erratic value for some reason.
When color displacement is not corrected by image position correction
control, clear the correction value once. Then, either turn OFF/ON the
power or execute the quick adjustment in Settings/Registration menu
so that image position correction control is performed again.
Use case When color displacement cannot be corrected although image position
correction control is performed
Adj/set/operate method Select the item, and then press OK key.
Related user mode Adjustment/Maintenance> Adjust Image Quality> Auto Adjust
Gradation> Quick Adjust
USBM-CLR Initialize USB MEAP priority rgst info
Lv.1 Details To initialize the registered ID data retained in the OS field by calling the
API provided by the OS.
Use case When a failure occurs in USB MEAP priority registration
Adj/set/operate method Select the item, and then press OK key.
JV-CACHE Clearing of MEAP application cache
Lv.1 Details To clear the MEAP cache area.
MEAP applications bundled as standard are redeployed after clearing,
but data will not be recovered.
If you clear MEAP application which has been installed additionally,
reinstall it manually. Data will not be recovered.
For details, refer to the Service Manual.
Use case When initializing the MEAP application
Adj/set/operate method Select the item, and then press OK key.
Caution If you clear MEAP application which has been installed additionally, be
sure to reinstall it manually.
Supplement/memo MEAP applications bundled as standard: system application, built-in
login application
MEAP applications installed additionally: non-Canon-made login
application, general application, etc.
8
Service Mode > COPIER > FUNCTION > CLEAR
8 Service Mode > COPIER > FUNCTION > CLEAR
COPIER>FUNCTION>CLEAR
LANG-CLR Uninstallation of language files
Lv.2 Details To uninstall the language files other than Japanese and English files
installed in HDD.
When installing a new language file while the maximum number
of language files (11 files) have been already installed, an existing
language file needs to be uninstalled.
Use case When deleting/switching language files
Adj/set/operate method 1) Select the item, and then press OK key.
2) Download the firmware in which the necessary language files are
included using SST or a USB memory.
Caution A language file is not uninstalled unless the downloaded language files
are installed by SST or a USB memory after the execution of this item.
If installation is not executed, uninstallation will be canceled. (Status of
the machine remains the same as it was before execution.)
Supplement/memo - After the execution, language displayed on the screen becomes
English. Switch the language as needed.
- There are 9 language files (JEFIGSCKT) installed at the time of
shipment.
FIN-MCON Clearing of Finisher information
Lv.1 Details To clear the Finisher information which is stored in the Main Controller.
After execution, set the Delivery Tray again in "Output Tray Settings" in
Settings/Registration menu.
Use case When switching to another type of Finisher in the field
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Related user mode Function Settings> Common> Paper Output Settings> Output Tray
Settings
LS-INT-H Initial laser copy ratio correct offset
Lv.2 Details To return the offset value of the laser copy ratio correction to 0
(initialization).
Execute this item before performing copy ratio correction between Y/M/
Bk and C.
Use case When color displacement occurs at the center of an image (especially
at installation or at replacement of the Laser Scanner Unit)
Adj/set/operate method Select the item, and then press OK key.
Default value 0
Related service mode COPIER> ADJUST> IMG-REG> LS-H-YL/YC/YR/ML/MC/MR/KL/KC/
KR
8-125
8-125