Procedure To Start And Stop A Meap Application - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > MEAP > Settign Procedure > Procedure to Start and Stop a MEAP Application
4) Some applications show a screen to indicate the terms of agreement. Read the terms, and
click [OK].
5) When installation is complete, the MEAP application management page is displayed.
Note:
Since the status of applications installed with [Only Install] selected in [Operation to
Perform:] is set to [Installed, it is necessary to click [Start] to change their status to
[Started].
2 Technical Explanation > MEAP > Settign Procedure > Procedure to Start and Stop a MEAP Application

■ Procedure to Start and Stop a MEAP Application

1) Log in to the SMS, and click [MEAP Application Management].
2) Click [Start] or [Stop] shown for the MEAP application to be started or stopped.
3) Check to see that the status of the MEAP application in question is either [Started] or
F-2-128
[Stopped].
F-2-129
2-109
F-2-130
F-2-131
2-109