Installation Procedure - Canon imageRUNNER ADVANCE C3325 Series Service Manual

Installation Procedure

■ Installing the Serial Interface Kit
1)
NOTE: Remove the Face Plate while holding it.
• 1 Screw (upper) (Remove)
• 1 Screw (lower) (to loosen)
CAUTION:
Be careful not to drop the Face Plate.
1x
1x
NOTE: The removed screw (upper) will be used in step 4.
9
Installation > Serial Intreface KIT-K2/ Copy Control Interface KIT-A1 > Installation Procedure > Installing the Serial Interface Kit
2)
NOTE: The removed screw (lower) will be used in step 4.
3)
F-9-256
9 Installation > Serial Intreface KIT-K2/ Copy Control Interface KIT-A1 > Installation Procedure > Installing the Serial Interface Kit
1x
3x
1x
M3x6
9-104
F-9-257
F-9-258
9-104