Canon imageRUNNER ADVANCE C3325 Series Service Manual page 630

COPIER>ADJUST>COLOR
PH-OFS-M Adj M-clr hi dens area clr balance: PDL
Lv.2 Details To adjust the color balance of the high density area of M-color at PDL
print.
The target data is the data generated by the printer driver and stored
in Mail Box.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
PH-OFS-C Adj C-clr hi dens area clr balance: PDL
Lv.2 Details To adjust the color balance of the high density area of C-color at PDL
print.
The target data is the data generated by the printer driver and stored
in Mail Box.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
8
Service Mode > COPIER > ADJUST > COLOR
8 Service Mode > COPIER > ADJUST > COLOR
COPIER>ADJUST>COLOR
PH-OFS-K Adj Bk-clr hi dens area clr balance: PDL
Lv.2 Details To adjust the color balance of the high density area of Bk-color at PDL
print.
The target data is the data generated by the printer driver and stored
in Mail Box.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
8-79
T-8-27
8-79