About Sms; User Authentication Methods; Default Authentication Overview; Rls Authentication - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > MEAP > About SMS > RLS Authentication
with User Authentication
• The protocol used by the SRV record information of the LDAP service is "_tcp" and the
service name is "_ldap"
• The protocol used by the SRV record information of the Kerberos service is "_udp" and the
service name is "_kerberos"
● User Authentication Methods
User Authentication includes Local Device Authentication and Server Authentication as user
authentication methods. Local Device Authentication uses the user database registered in the
device to perform authentication while Server Authentication uses an authentication server on
a network to perform user authentication.
As the setting, either "Local Device Authentication" or "Local Device Authentication + Server
Authentication" can be selected.
If "Local Device Authentication + Server Authentication" is selected, such operation is possible
in which Server Authentication is used to authenticate users registered in the authentication
server at normal times while Local Device Authentication is used when it is necessary to
temporarily authenticate users that cannot be added to the authentication server. Also, if a
problem occurs with the authentication server, Local Device Authentication can be used until
the server recovers.
[Local Device Authentication + Server Authentication] Diagram
Local user
Remote user

■ Default Authentication overview

This login service is selected when the department ID management is enabled or no
authentication function is set. Set the department ID management to [ON] on [Settings
/ Registration] of this device and register 7-digit ID and PIN by department. This setting
restricts the use of this device only to users keying the registered ID and PIN. Department
IDs/ and PINs can be registered on the touch panel of this device or Remote UI.
2 Technical Explanation > MEAP > About SMS > RLS Authentication
Server authentication
Local device authentication
ローカルデバイス認証
F-2-118

About SMS

■ Overview
MEAP has SMS (Service Management Service) as a service for managing login services and
MEAP applications.
SMS is a servlet-type service which is used via a PC's browser.
Access SMS in a device from the browser of a PC connected to the network to manage
MEAP applications, etc.

■ RLS Authentication

Login without using the SMS login window but by entering the user ID and password for
authentication in the RLS (Remote Login Service) window. The user information (user name
and password) used is the information for user authentication.
Therefore, it is an authentication method that can be used when using User Authentication as
the login service. The procedure for logging in is indicated below.
The login procedures are as follows.
1) Access SMS by RLS Authentication from the PC browser on the same network as the
MEAP device.
URL: https://<IP address of this device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls/
Note:
• To encrypt the password information input when logging in, SSL of the login screen was
made effective.
• It is redirected to new URL (effective SSL) even when accessing with URL (non-SSL)
before.
• When the device authentication method used is server authentication, enter the user
name, password and login destination registered with authentication server and then click
"Log In".
• If the authentication method used is local device authentication, enter the user name,
password and login destination registered in the device and click "Log In".
• The user information is set as below for local device authentication by default. Both are
case sensitive.
- User Name: Administrator
- Password: 7654321
2-100
2-100