Meap Application Counter; Approximate Installation Space - Canon imageRUNNER 5570 Service Manual

D.

MEAP Application Counter

In addition to the Soft Counter function, the MEAP Application Counter
counts the number of prints and scans per MEAP application.
There are two methods to display the MEAP Application Counter value:
1. The MEAP counter can be viewed from a web browser through a
network connected PC with the MEAP device by logging into the
SMS "Application/License Information" page.
2. To view the MEAP counter from the device itself, press "Counter
Check" on the control panel, then from the LCD screen, press the
"MEAP Counter" button.
Each MEAP application has its own counter. The number of applications
that can be installed on an imageRUNNER device is directly related to the
number of counters available. There are twenty (20) counters available for
MEAP applications. However, this imageRUNNER device uses two MEAP
application counters: one for the Portal Service and one for the optional
Universal Send. Therefore, the number of additional MEAP applications
that can be installed is eighteen. The Portal Service can be uninstalled to
free up one extra counter.
There are three types of MEAP applications:
1. Applet - a user interface for the application is on the control panel of
the copier.
2. Servlet - a remote user interface is available for the application.
3. Esplet - there is no user interface for the application.
Applet type applications used directly from the control panel are limited to
nine (three tabs in each pane times three panes).
E.

Approximate Installation Space

Main Unit + Copy Tray
imageRUNNER 5570/6570 Service Guide
imageRUNNER 5570/6570 Service Guide
Main Unit + Finisher-T1 + Puncher Unit + Paper Deck-V1
Rev. 0 April 2005 Page 10