Rep 7.1 Bypass Feed Assembly; Rep 7.2 Registration Solenoid And Tray 1 Pickup Solenoid - Xerox Phaser 3635MFP Service Manual

REP 7.1 Bypass Feed Assembly

Parts List on PL 7.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item 1.
2. 3635 only. Remove the UI assembly,
3550 only. Remove the UI assembly,
3. Remove the scanner assembly, REP
4. Remove the front cover assembly, PL 28.10 Item
5. Remove the front mid cover, REP 28.3.
6. 3635 only. Disconnect CN37 from the
3550 only. Disconnect CN28 from the
7. Remove the bypass feed assembly,
1
Remove 4 screws, then remove the
bypass feed assembly.
Figure 1 Bypass feed removal
Replacement
1. Replacement is the reverse of the removal procedure.
Phaser 3635MFP/WorkCentre 3550
CAUTION
GP 10 General Disassembly Precautions.
REP 2.1.
REP 2.3.
14.1.
7.
Main PWB.
Main PWB.
Figure 1.

REP 7.2 Registration Solenoid and Tray 1 Pickup Solenoid

Parts List on PL 8.25
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to
1. Remove the left cover, REP
2. Remove the main drive assembly, refer to
3. 3635 only. Disconnect CN36 on the
3550 only. Disconnect CN29 on the
4. Remove the relevant component:
• Tray 1 pickup solenoid,
• Registration solenoid, PL 8.25 Item
Replacement
1. Replacement is the reverse of the removal procedure.
April 2010
4-21
WARNING
WARNING
CAUTION
GP 10 General Disassembly Precautions.
28.1.
REP 4.1.
Main PWB.
Main PWB.
PL 8.25 Item 19.
18.
Repairs and Adjustments
REP 7.1, REP 7.2