Manual Login At Gatekeeper - Avaya T3 IP Service Manual

2 Service operation
2.4.2

Manual login at gatekeeper

If no gatekeeper is found during the automatic search procedure, you can select one manu-
ally. You will recognise an unsuccessful search by the message "....Searching Network..."
being displayed permanently.
Manual input of name and IP address of a known gatekeeper:
Cancel automatic gatekeeper search.
Open audit menu (→ p. 114).
to the menu item Gatekeeper list and confirm.
Scroll
to the menu item Create new enty and confirm. Then enter a name and
Scroll
the IP address of the gatekeeper known to you.
to the menu item Safe entry and confirm.
Scroll
Quit audit menu.
Scroll to the menu item Gatekeeper list .
Select gatekeeper, e.g. GKxyz 123.456.000.123
Confirm selection. The search for the gatekeeper specified is now started. After no
more than 10 seconds or so, a message telling you that logging–in was successful will ap-
pear on the display.
4.999.099.262 - 07/07
2.4 Commissioning – supplementary notes
Page 56