Logging In To Secure Communication - Avaya T3 IP Service Manual

2 Service operation
2.8.2

Logging in to secure communication

When logging in to secure communication always is needed a PIN. This applies to users
that are marked as secure or normal by means of the the VoIP board settings. The basis for
the default PIN is the own call number in inverted form. The length of the default PIN is set
in the PABX.
Call number Default PIN (4 digits)
12 2121
1234 4321
123456 6543
Explanation of the table: Depending on the PIN length, the digits of the inverted call number
are repeated until the desired PIN length has been reached or surplus digits are cut off.
Notes:
•
If the default PIN has been changed one time, the length of the input field "Sec PIN" has
the same number of digits as the PIN. Some seconds may elapse until the length of the
input field is shown correctly.
•
A user who has logged in for secure communication, after the first log in, receives a infor-
mation message asking him to change his PIN. It is recommended to change the PIN
immediately to prevent others who know the default PIN from logging on to another tele-
phone with this call number.
4.999.099.262 - 07/07
2.8 Secure communication in C–package step II.1 and higher
Default PIN (5 digits)
21212
43214
65432
Page 90