2
Service operation
Note:
•
After a successful software update activated by one of the numeric keys (method 1),
the bootlist menu item is reset to "off".
•
The bootlist menu item can be changed in the audit menu or via web terminal under bootline.
•
The IP telephone is supplied with the bootlist set to "on" by default.
•
Upon activation of downloading, "Download activated" appears in the display together
with the version name of the software, obtained from the DEFAULT line in the config-
uration file.
•
If the FTP server cannot be obtained, after a waiting time of no more than 75 seconds
the display will change to "Booting from flash:" as well as the version name of the
software.
•
The IP telephone in the corresponding hardware version will automatically update the
letters denoting the hardware version (Comfort: a, h, Classic: b, s, or Compact: c) in
the file name, if necessary. For example, the IP telephone in the Classic hardware
version receives the configuration file with the file name T080_0DE.h3i and before
downloading changes the file name to T080_0DE.s3i.
(d) The software file (application) saved in the flash memory is decompressed and loaded
into the main memory.
Note:
•
If the IP telephone does not detect any valid software in the flash memory, the tele-
phone commissioning procedure will stop and the message "No software loaded" will
be shown in the display
The subsequent procedure is as described in section 1 (c) onwards.
4.999.099.262 - 07/07
2.3
Commissioning – standard procedures
Page 53