Avaya T3 IP Service Manual page 246

3 References
R
Redial ex.(in barred features list)
Enables delayed automatic redial abroad: This allows the Delayed Automatic Re-
dial feature to be used when the "Busy" state is not signaled by "DISCONNECT on
dialing a subscriber through an analogue external exchange.
If this function is enabled and the "Delayed redialing" function is activated subse-
quent to incomplete dialing, then dialing will be repeated up to nine times. It is also
possible that a new connection may be disconnected during this process. The fac-
tory setting is "barred".
Redial interval
The length of time after which dialling is to be repeated. You may choose from 10,
20, 30 and 60 seconds.
Restrict signalling (in barred features list)
To disable / enable the "Restrict partner signalling" feature. The factory setting is
"barred".
S
Send test patt.
For testing the digital interface.
Possible settings:
- "Periodic signal": 96 kHz signal
- "Single pulse": 4 kHz signal
- "No signal" Deactivate test pattern
4.999.099.262 - 07/07
3.1 Menu items in the display
Page 246