Transfer Changed Settings To The Ip Telephone - Avaya T3 IP Service Manual

2 Service operation
If you have not made an entry into web terminal for 5 minutes you will receive a message
that web terminal will automatically shut down after one minute. Every entry resets both tim-
ers.
2.10.2

Transfer changed settings to the IP Telephone

If you wish to use for the IP telephone settings you modified in a sub–window, you should
proceed as follows:
1. Quit the sub–window via the Accept button. The data is not transferred to the telephone!
(Special features on phone pass data can be found under 2.9.7). In the main window you
will now see the status display Data Changed alongside the corresponding button.
2. If need be, make further settings in other sub–windows.
Transfer Data to the IP Telephone:
After data has been sent, bar web
terminal
3. Press the "Send Data" button
The new data will now be transferred to the IP Telephone. On the phone display appears
"Save your settings".
4.999.099.262 - 07/07
Activate if you want to prevent further settings from being changed by Web Terminal
after you have made your alterations. The re–enabling of Web Terminal can only be
carried out via the T3 IP telephone (→ p. 107).
2.10 The web terminal
Page 95