2.10.18 Configure Access Of Voip Monitoring Manager To T3 Ip Phone - Avaya T3 IP Service Manual

2 Service operation

2.10.18 Configure access of VoIP Monitoring Manager to T3 IP phone

You can block access for VoIP Monitoring Manager (VMM, → S. 148) so that no RTCP data
is sent to the VMM server
Open audit menu.
Scroll to the RTCP menu item. Confirm selection.
Enable/block access:
Scroll to the VMM Server menu item. Confirm selection.
Scroll to the desired setting, e.g. ein . Confirm selection.
Set IP address of VMM server:
Scroll to the VMM Server IP-Addr menu item.
Confirm selection. Enter IP address.
Scroll to Port
Scroll to Store entry
Confirm selection.
If you change a setting and exit the audit menu, the phone will reset itself. The new setting
is now active.
4.999.099.262 - 07/07
settings. Enter port.
menu item.
2.10 The web terminal
Page 117