Commissioning - Supplementary Notes; Activating And Deactivating Dhcp Server - Avaya T3 IP Service Manual

2 Service operation
2.4 Commissioning – supplementary notes
2.4.1

Activating and deactivating DHCP server

With phone software C–package step III and higher you can define during booting whether
you want to use a DHCP server. Previously, you could only set this in the Web Terminal or in
the phone's audit menu.
Deactivate DHCP
The booting procedure has started. The display shows DHCP... .
Hold down the down arrow key for approx. 1 second until the display shows
DHCP deactivated! .
The phone will reset itself and the booting procedure will start without searching for a DHCP
server.
Switch on DHCP
The booting procedure has started. The display shows DHCP on?
Hold down the down arrow key for approx. 1 second until the display shows
DHCP activated! .
The phone will reset itself and the booting procedure will start. The system will search for a
DHCP server.
4.999.099.262 - 07/07
2.4 Commissioning – supplementary notes
Page 55