SECTION 303-01B: Engine — 4.6L (2V)
IN-VEHICLE REPAIR
Camshaft Roller Follower
Special Tool(s)
Compressor, Valve Spring
(Intake)
303-452 (T93P-6565-AR)
Compressor, Valve Spring
(Exhaust)
303-567 (T97P-6565-AH)
Removal
1. Remove the valve cover. For additional information, refer to
in this section.
2. Position the piston of the cylinder being serviced at the bottom of the stroke and the camshaft
lobe at base circle.
3. Using the special tool compress the intake valve spring.
4. Remove the roller follower from the intake valve.
2003 Mustang Workshop Manual
Valve Cover LH
or
Valve Cover RH