Ford 2003 Mustang Workshop Manual page 1183

4. Connect the CMP sensor electrical connector.
5. Raise the vehicle.
6. Install the crankshaft front oil seal. For additional information, refer to
in this section.
7. Tighten the four oil pan bolts in the sequence shown.
Stage 1: Tighten to 2 Nm (18 lb-in).
Stage 2: Tighten to 20 Nm (15 lb-ft).
Stage 3: Tighten an additional 60 degrees.
8. Install the drain plug.
Crankshaft Front Oil Seal