13. Position the battery cable and install the two nuts.
14. Install the crankshaft pulley. For additional information, refer to
Crankshaft Pulley
in this section.
15. Install the water pump pulley and the bolts.
16. Install the cooling fan. For additional information, refer to
Section 303-03A
or
Section 303-03B
.
17. Install the accessory drive belt. For additional information, refer to
Section 303-05
.
18. Install the valve covers. For additional information, refer to
Valve Cover RH
and
Valve Cover LH
in this section.
19. Position the radio ignition interference capacitors and install the nuts.