Ford 2003 Mustang Workshop Manual page 1209

5. Lower the vehicle.
6. Using the special tools, raise the engine.
7. Remove the air cleaner outlet tube. For additional information, refer to
8. Raise and support the vehicle.
9. Remove the starter motor. For additional information, refer to
10. Separate the exhaust at the exhaust manifold. For additional information, refer to
00 .
11. Remove the exhaust manifold.
1. Remove the exhaust manifold nuts.
2. Remove the exhaust manifold.
3. Remove the exhaust manifold gasket and discard.
12. NOTE: Tighten the exhaust manifold nuts in the sequence shown.
To install, reverse the removal procedure.
Section 303-12
Section 303-06 .
Section 309-
.