Install No.1 Timing Belt Cover; Install Lh Camshaft Timing Pulley - Toyota 22R-E Service Manual

EG2–42
ENGINE – ENGINE MECHANICAL

5. INSTALL NO.1 TIMING BELT COVER

(a) Install the gasket to the timing belt cover.
(b) Install the timing belt cover with the three bolts.
6. INSTALL CRANKSHAFT PULLEY
(a) Align the pulley set key with the key groove of the
crankshaft pulley.
(b) Temporarily install the pulley bolt.
(c) Using SST, tighten the pulley bolt.
SST 09213–58012 (90201 –08131, 91111 –50845),
09330–00021
Torque: 245 N–m (2,500 kgf–cm, 181 ft–lbf)
(d) Install the PS drive belt pulley with the four bolts.

7. INSTALL LH CAMSHAFT TIMING PULLEY

(a) Install the knock pin to the camshaft.
(b) Align the knock pin hole of the camshaft with the
knock pin groove of the timing pulley.
(c) Slide the timing pulley on the camshaft, facing the
flange side outward.
(d) Using SST, install the pulley bolt.
SST 09278–54012
Torque: 108 N–m (1,100 kgf–cm, 80 ft–Ibf)