Server Date/Time screen
2. Verify or set the media server's time close enough to the NTS's time, date, and time zone
that synchronization can occur (within about 5 minutes).
Installing post-upgrade Communication Manager
update file from your laptop, if any
Skip this procedure if there is no Communication Manager update file to install.
!
CAUTION:
The software update may or may not be call-preserving.
CAUTION:
To install the post-upgrade software update
1. Open a telnet session.
Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
3. Log in with the initial craft ID and password.
You cannot use dadmin at this point.
Note:
If you restored the security backup set from a 2.x release, you should be able to
Note:
use the normal craft login.
Upgrading the S8300A
Issue 7 January 2005
289