Fixing Section - Kyocera KM-4230 Service Manual

2A3/4

3-3-9 Fixing section

( 1 ) Detaching and refitting fixing heaters M and S
Replace fixing heaters M and S as follows.
<Procedure>
1. While raising the fixing unit release lever, draw the fixing unit out of the machine.
2. Remove the screw holding the fixing unit and then the unit.
Fixing unit
3-3-64
Figure 3-3-75 Detaching the fixing unit
Fixing unit release lever
Screw
*Illustration shows a 42 ppm.