Kyocera KM-4230 Service Manual page 461

2A3/4
(23) When the duplex unit
is used, the center of
the original image
and that of the copy
image do not align.
Causes
1. Side registration sec-tion installed
incor-rectly.
(24) When the large paper
deck is used, the
center of the original
image and that of the
copy image do not
align.
Causes
1. Center adjuster installed incor-
rectly.
3-6-16
Causes
1. Side registration section installed incorrectly.
Check procedures/corrective measures
Adjust the installation position of the side
registration section (see page 3-3-87).
Causes
1. Center adjuster installed incorrectly.
Check procedures/corrective measures
Adjust the installation position of the center
adjuster (see page 3-3-105).