2A3/4
10. Route the dehumidifier relay cable using the five wire saddles.
11. Insert the 2-pin connector of the optical heater into the 2-pin connector of the
dehumidifier relay cable.
12. Insert the 2-pin connector of the main PCB into the 2-pin connector of the
dehumidifier relay cable.
13. Insert the 4-pin connector of the main PCB into the 4-pin connector of the
dehumidifier relay cable.
Optical heater (cable)
Dehumidifier relay cable
2-pin connector
3-1-36
2-pin connector
2-pin connector
4-pin connector
4-pin connector
2-pin connector
Wire saddle
Main harness
Figure 3-1-45
Wire saddle
Wire saddle
Wire saddle
Main harness
Wire saddle
1-pin connectors