Kyocera KM-4230 Service Manual page 188

2A3/4
3. Slide the paper size label sheet into the front of drawer.
4. If the user requests the side guides to be fixed, fix according to the paper size
using four M3
Screws
5. Set the paper size on the operation panel. (For 220 - 240 V specifications only)
Make test copies.
1. Place an original and make test copies.
Check if the center lines of the large paper deck, the bypass table and each
drawer are correct. If not, adjust the center lines.
Completion of the machine installation.
3-1-28
Figure 3-1-35
×
8 flat-head screws.
Side guides
Figure 3-1-36
Paper size label sheet
Screws