Kyocera KM-4230 Service Manual page 349

2A3/4
(11) Adjusting the margins for scanning an original on the contact glass
Perform the following adjustment if the margins are not correct.
U402
U403
(P.3-3-20)
Caution: Before making the following adjustment, ensure that the above adjustments
have been made in maintenance mode.
<Procedure>
Enter maintenance mode.
Enter "403" using the numeric keys.
Press the print key.
Select the item
to be adjusted on the touch panel.
Press the interrupt key.
Set an A3 size original and
make a test copy with
the 100% magnification.
Are the margins correct?
B
3-3-40
U404
(P.3-3-99)
Start
No
Yes
A
Touch panel display
SCAN A MARGIN: scanner left margin
SCAN B MARGIN: scanner leading edge margin
SCAN C MARGIN: scanner right margin
SCAN D MARGIN: scanner trailing edge margin
Press the print key.
Change the setting.
Increasing the value using
the Up key makes the margin wider.
Decreasing the value using
the Down key makes the margin
narrower.
Setting range (default)
Scanner left margin: 0 - +20 (2)
Scanner leading edge margin: 4 - +20 (6)
Scanner right margin: 0 - +20 (2)
Scanner trailing edge margin: 0 - +20 (6)
Changing the value by one moves
the margin by 0.5 mm for all.
The new setting
is stored.