Kyocera KM-4230 Service Manual page 338

2A3/4
14. Detach the three connectors.
15. Remove the two screws holding the LSU adjuster mount and then the mount.
16. Remove the three pins and replace the laser scanner unit.
17. Refit all removed parts.
Caution: When fitting the scanner unit, fit from directly above the machine to prevent
deformation of the grounding point.
Pins
Connectors
Laser scanner unit
Connector
Laser scanner unit
Screws
LSU adjuster mount
Figure 3-3-35 Replacing the laser scanner unit
3-3-29