Kyocera KM-4230 Service Manual page 106

8. Bypass paper length switch (BYPPLSW) .... Detects the length of paper on the
9. Bypass paper width switch (BYPPWSW) .... Detects the width of paper on the
10. Bypass table extended detection switch ...... Detects when the bypass table support
(BYPEDSW)
11. Upper lift limit switch (LICSW-U) ................. Detects the upper drawer lift reaching
12. Lower lift limit switch (LICSW-L) .................. Detects the lower drawer lift reaching
13. Paper feed switch 1 (PFSW1) ..................... Controls feed clutch 4.
14. Paper feed switch 2 (PFSW2) ..................... Controls feed clutch 1, 2 and 3, and the
15. Paper feed switch 3 (PFSW3) ..................... Controls the lower paper feed clutch.
16. Paper feed switch 4 (PFSW4) ..................... Controls feed clutch 3.
17. Feed switch (FSW) ...................................... Controls the secondary paper feed start
18. Registration switch (RSW) ........................... Controls the secondary paper feed end
19. Eject switch (ESW) ...................................... Detects paper jam in the fixing section.
bypass table.
bypass table.
guide is extended to use long paper.
the upper limit.
the upper limit.
upper paper feed clutch.
timing.
timing.
2A3/4
2-1-5