Kyocera KM-4230 Service Manual page 285

2A3/4
Maintenance
item No.
U256 Turning auto preheat/energy saver function on/off
Description
Selects if the auto preheat/energy saver function is turned on. When set to
ON, the time to enter preheat/energy saver mode can be changed in copy
management mode.
Purpose
According to user request, to set the preheat time to save energy, or
enable copying promptly without the recovery time from preheat mode.
Method
Press the print key. The setting is set. The screen for selecting an item is
displayed.
Setting
1 Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: ON
2 Press the print key. The setting is set. The screen for selecting a
maintenance item is displayed.
When change from OFF to ON, the initial value of 15 min. is set.
Completion
To exit this maintenance item without changing the current setting, press
the stop clear key. The screen for selecting a maintenance item No. is
displayed.
3-2-76
Description
Description
Auto preheat/energy saver function on
Auto preheat/energy saver function off