Kyocera KM-4230 Service Manual page 109

2A3/4
Machine front side
1. Upper paper feed clutch (PFCL-U) .............. Primary paper feed from the upper
2. Lower paper feed clutch (PFCL-L) .............. Primary paper feed from the lower
3. Feed clutch 1 (FCL1) ................................... Controls the drive of feed roller 1.
4. Feed clutch 2 (FCL2) ................................... Controls the drive of feed roller 2.
5. Feed clutch 3 (FCL3) ................................... Controls the drive of feed rollers 3 and
6. Feed clutch 4 (FCL4) ................................... Controls the drive of the lower feed
7. Feed clutch 5 (FCL5) ................................... Controls the drive of the lower feed
8. Eject speed switching clutch (ESCL) ........... Switches the paper ejection speed.
9. Registration clutch (RCL) ............................ Secondary paper feed.
10. Bypass paper feed clutch (BYPPFCL) ........ Primary paper feed from the bypass
11. Bypass solenoid (BYPSOL) ......................... Operates the bypass forwarding pulley.
2-1-8
8
Figure 2-1-6 Copier (clutches and solenoids)
9
6
Machine inside
drawer.
drawer.
4.
roller at high speed.
roller at low speed.
table.
11
10
7
3
4
1
5
2
Machine back side