Kyocera KM-4230 Service Manual page 319

2A3/4
Remove the bypass uppedr paper feed pulley.
6. Remove the spring from the bypass forwarding pulley retainer.
7. Remove the stop ring.
8. Move the bushing in the direction of arrow A and remove it from the bypass
forwarding pulley retainer.
9. Push the bypass solenoid lever in the direction of arrow B and remove the bypass
forwarding pulley retainer in the direction of arrow C.
Bypass
solenoid
lever
Bypass forwarding
pulley retainer
Figure 3-3-11 Detaching the bypass forwarding pulley retainer
3-3-10
Spring
B
Bushing
Stop ring
A
C