Kyocera KM-4230 Service Manual page 329

2A3/4
(6-3) Adjusting the margins for printing
Make the following adjustment if the margins are not correct.
U 403
U402
(P.3-3-40)
Caution: Check the copy image after the adjustment. If the margins are still incorrect,
perform the above adjustments in maintenance mode.
<Procedure>
Enter maintenance mode.
Enter "402" using the numeric keys.
Press the print key.
Select the items
to be adjusted on the touch panel.
Press the interrupt key.
Press the print key to make a test
copy using A3/11"
Are the margins correct?
B
3-3-20
U404
(P.3-3-100)
Start
×
17" paper.
Yes
A
Touch panel first display
A EDGE: printer left margin
LEAD EDGE: printer leading edge margin
C EDGE: printer right margin
(TRAIL EDGE: printer trailing edge margin)
Press
the stop/clear key.
Touch panel second display
TRAIL EDGE: printer trailing edge margin
TRAIL EDGE 2: printer trailing edge margin
Press the print key.
The new setting is stored.
No
Change the setting using the Up/Down keys.
Setting range (default)
Printer leading edge margin: 0 - +10.0 (3.0)
Printer trailing edge margin: –5.0 - +10.0 (5.0)
Printer left/right margin: –5.0 - +10.0 (3.0)
Printer trailing edge margin for
duplex copying (secondface): –5.0 - +10.0 (4.0)
Increasing the value makes the margin wider
and decreasing it makes the margin narrower.
Changing the value by 1 moves the margin by
0.1 mm for all.
for duplex copying (second face)