Kyocera KM-4230 Service Manual page 248

Maintenance
item No.
U102 Setting the cleaning interval for the transfer charger
Description
Executes a cleaning operation for the transfer charger and changes the
intervals at which the transfer charger is cleaned.
Purpose
To check the cleaning operation for the transfer charger. Also to change
the intervals for the operation. Making the intervals longer decreases the
stand-by time when starting copying.
Method
1 Press the print key. The screen for selecting an item is displayed.
2 To execute the cleaning operation, press TEST RUN. The cleaning
operation for the transfer charger is executed once.
Setting
1 Change the setting using the Up/Down keys.
Description
Transfer charger
cleaning operation
intervals
When set to 3, the transfer charger is cleaned every 3000 copies (3 by
1000) counted after the main switch is turned on. When set to 0, the
transfer charger is not cleaned.
2 Press the print key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No.
is displayed.
Description
Setting range Initial setting
0 to 20 1
Change in value per step
1000 copies
2A3/4
3-2-39