2A3/4
11. Detach the open connector from the connector of the main wire on the machine
rear.
12. Insert the dehumidifier heater connectors into the relay wire connectors (see A in
Figure 3-1-58).
13. Insert the main wire connector into the relay wire connector (see B in Figure 3-1-
58).
14. Tidy up the large paper deck wires and relay wire using the six bands and route the
wires while clipping the bands into holes in the rear frame.
Band
15. Refit all removed parts.
3-1-46
Main wire
Open connector
Figure 3-1-57
A
Bands
Relay wire
Figure 3-1-58
Main wire
Band
Bands
B