Kyocera KM-4230 Service Manual page 86

(11-3) Original conveying section
The original conveying section consists of the parts shown in Figure 1-3-53.
Synchronized with the copier scanning operation, the original is conveyed across the slit
glass and ejected when scanning is complete.
In the double-sided original mode, the eject feedshift solenoid (EFSSOL) turns on,
moving the eject feedshift guide to switch the path of the original. When the scanning of
the first face (reverse face) of the original is complete, the original is conveyed to the
original switchback section again.
1
2
4
9
#
1 Upper original conveying pulley
2 Upper original conveying roller
3 Lower original conveying roller
4 Front scanning pulley
5 Middle original conveying roller
6 Middle original conveying pulley
7 Eject pulley
8 Eject roller
0
7
$
3
5
Figure 1-3-53 Original conveying section
!
6 @
8
9 Original conveying guide
0 Eject feedshift guide
! Upper eject guide
@ Lower eject guide
# Slit glass (copier)
$ DF timing switch (DFTSW)
% Eject feedshift solenoid (EFSSOL)
2A3/4
%
1-3-63