Kyocera KM-4230 Service Manual page 317

2A3/4
( 2 ) Detaching and refitting the bypass forwarding, upper and lower paper feed
pulleys
Replace the bypass forwarding, upper and lower paper feed pulleys as follows.
<Procedure>
Removing the bypass paper feed unit
1. Open the right cover and bypass table, and remove right front lower cover B, the
right rear lower cover and middle right cover.
2. Detach the connector under the bypass table and then the bypass table.
3-3-8
Figure 3-3-8 Detaching the bypass table
Bypass table
Connector