(6-2) Adjusting the DF trailing edge registration
<Procedure>
Start
Enter maintenance mode.
Enter "071" using the numeric
keys and press the print key.
To adjust the DF trailing
edge registration, select
"TRAIL EDGE ADJ."
Press the interrupt key.
Place an original on the DF
and make a test copy.
Is the image correct?
Press the stop/clear key.
Exit maintenance mode.
End
No
Yes
Original
Press the print key.
The new setting is stored.
• For copy example,
decrease the value using
the Down key.
Setting range: –32 - +32
Reference: 0
Changing the value by 1 moves
the copy image by 0.19 mm.
Copy
example
Figure 3-3-117
2A3/4
3-3-99