Kyocera KM-4230 Service Manual page 211

2A3/4
• Data setting
Data is changed by pressing the Up/Down keys, and the new data is set by pressing the print
key. In a maintenance item where multiple items can be changed, the item to be changed
is selected by pressing on it on the touch panel.
Correcting position of FOLIO
LENGTH DATA
3
WIDTH DATA
1 Adjustment window ············· Displays the data to be set.
2 Up/Down keys ····················· Changes the setting.
3 Items ··································· Displays the selected item in reverse.
4 Current setting ····················· Displays the previously set data by pressing the print key.
5 Print key ······························ Sets the changed setting.
6 Stop/clear key ····················· Cancels the change.
3-2-2
U035
330
: 330
: 210
4
Figure 3-2-1
Metric
1
6
2
Inch
Stop/
Clear
6
/ C
5
Start
5