Kyocera KM-4230 Service Manual page 346

( 8 ) Adjusting magnification of the scanner in the auxiliary scanning direction
Perform the following adjustment if the magnification in the auxiliary scanning direction
is not correct.
U053
(P.3-2-20) (P.3-3-18)
(P.3-3-40)
Caution: Before making the following adjustment, ensure that the above adjustments
have been made in maintenance mode.
<Procedure>
Start
Enter maintenance mode.
Enter "065" using the numeric keys.
Press the print key.
Select "SUB SCAN ADJ"
(auxiliary scanning direction).
Press the interrupt key.
Set an A3 size original and
make a test copy with
the 100% magnification.
Is the image correct?
Yes
Press the stop/clear key.
Exit maintenance mode.
End
U034 U402
(P.3-3-20)
U403 U070
(P.3-3-96)
No
U065
U071
(P.3-3-98)
Original
Press the print key.
The new setting
For copy example 1, increase the
value using the Up key.
For copy example 2, decrease
the value using the Down key.
Setting range: –25 - +25
Reference: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
U066
(P.3-3-39)
U404
(P.3-3-100)
Copy
example 2
example
Figure 3-3-45
is stored.
2A3/4
Copy
3-3-37