Others - Kyocera KM-4230 Service Manual

Problem
(44) Poor contact in the
The message connector termi-
requesting nals of safety
covers to be switch 1, 2 or 3.
closed is dis-
Defective safety
played when
switch 1, 2 or 3.
the front, left
and right cov-
ers are
closed.
(45) Wiring is broken,

Others.

shorted or makes
poor contact.
Noise.
Causes Check procedures/corrective measures
Reinsert the connector. Also check for
continuity within the connector cable. If
none, remedy or replace the cable.
Check for continuity across each switch. If
there is no continuity when the switch is on,
replace it.
Check for continuity. If none, repair.
Locate the source of noise and remove.
2A3/4
3-6-87