Kyocera KM-4230 Service Manual page 274

Maintenance
item No.
U244 Checking the DF switches
Description
Displays the status of the respective switches on the SRDF.
Purpose
To check if respective switches on the SRDF operate correctly.
Start
1 Press the print key. The screen for selecting an item is displayed.
2 Select the type of switches (SW or VR) to be checked. The screen for
executing is displayed.
Display
SW
VR
Method for the on/off switches
1 Turn the respective switches on and off manually to check the status.
If the on-status of a switch is detected, the corresponding switch is
displayed in reverse.
Display
SET SW
FEED SW
REV SW
TMG SW
SZ A SW
2 To return to the screen for selecting an item, press the stop/clear key.
Method for the volume switch
1 Move the original insertion guides to check the detection status of the
original size width switch.
As shown on the next page, the detected original width is displayed as
a numerical value with the decimals omitted.
Description
Type of switches
On/off switches
Volume switch
Switches
Original set switch (OSSW)
Original feed switch (OFSW)
Original switchback switch (OSBSW)
DF timing switch (DFTSW)
Original size length switch (OSLSW)
2A3/4
3-2-65