Kyocera KM-4230 Service Manual page 399

2A3/4
• Detaching DF forwarding pulleys
5. Remove the stop ring and bushing. While lifting the forwarding shaft, remove the
DF forwarding pulleys.
6. Clean or replace the DF original feed pulley and DF forwarding pulleys.
7. Refit all removed parts.
∗ When fitting the DF original feed pulley and DF forwarding pulleys, ensure that the
side having the one-way clutch faces the machine rear.
DF forwarding pulleys
Stop ring
Bushing
Figure 3-3-107 Detaching the DF forwarding pulleys
3-3-90
One-way clutch
DF original feed pulley 28
Forwarding shaft
DF forwarding belt