14. Remove the stop ring and pull the joint shaft in the direction of the arrow.
Stop ring
Figure 3-3-15 Detaching the bypass lower paper feed pulley (1)
15. Remove the stop ring and then the bypass lower paper feed pulley.
Figure 3-3-16 Detaching the bypass lower paper feed pulley (2)
16. Replace the bypass forwarding, upper and lower paper feed pulleys.
17. Refit all removed parts.
Caution: When refitting the upper paper feed pulley, orient its blue end toward the
machine rear.
Joint shaft
Bypass lower paper feed pulley
Stop ring
Bypass separation retainer
2A3/4
3-3-13