Kyocera KM-4230 Service Manual page 105

2A3/4
long paper.
11. Upper lift limit switch (LICSW-U) ................. Detects the upper drawer lift reaching
12. Lower lift limit switch (LICSW-L) .................. Detects the lower drawer lift reaching
13. Paper feed switch 1 (PFSW1) ..................... Controls feed clutch 4.
14. Paper feed switch 2 (PFSW2) ..................... Controls feed clutch 1, 2 and 3, and the
15. Paper feed switch 3 (PFSW3) ..................... Controls the lower paper feed clutch.
16. Paper feed switch 4 (PFSW4) ..................... Controls feed clutch 3.
17. Feed switch (FSW) ...................................... Controls the secondary paper feed start
18. Registration switch (RSW) ........................... Controls the secondary paper feed end
19. Eject switch (ESW) ...................................... Detects paper jam in the fixing section.
* For inch specifications only.
Machine front side
Figure 2-1-3 Copier (switches in the paper feed and conveying system)
1. Upper paper switch (PSW-U) ...................... Detects the presence of paper in the
..................................................................... upper drawer.
2. Lower paper switch (PSW-L) ....................... Detects the presence of paper in the
3. Upper paper length switch (PLSW-U) ......... Detects the length of paper in the upper
4. Lower paper length switch (PLSW-L) .......... Detects the length of paper in the lower
5.*Upper paper width switch (PWSW-U) ......... Detects the width of paper in the upper
6.*Lower paper width switch (PWSW-L) .......... Detects the width of paper in the lower
..................................................................... drawer.
7. Bypass paper switch (BYPPSW) ................. Detects the presence of paper on the
* For inch specifications only.
2-1-4
19
3
4
Machine inside
the upper limit.
the upper limit.
upper paper feed clutch.
7
18
17
timing.
13
timing.
14
1
11
5
15
2
12
6
16
Machine back side
lower drawer.
drawer (inch specifications).
Detects the presence of the upper
drawer (metric specifications).
drawer (inch specifications).
Detects the presence of the lower
drawer (metric specifications).
drawer.
bypass table.
8
10
9