Kyocera KM-4230 Service Manual page 197

2A3/4
14. Remove the two screws holding the lower left cover and then the cover.
15. Remove the cap in the lower left cover.
16. Refit the lower left cover using the two screws.
17. Insert the heater switch instead.
18. Plug the two 1-pin connectors of the dehumidifier relay cable onto the terminals of
the heater switch.
Lower left cover
Cap
Heater switch
Heater switch
1-pin connector
Dehumidifier relay cable
1-pin connector
Figure 3-1-46
19. Refit all removed parts.
3-1-37