Kyocera KM-4230 Service Manual page 304

Hide thumbs Also See for KM-4230:

Table of Contents

Checking and resetting the count value on each ejection location

Displays and resets the count value of ejected sheets on each ejection

Checks the replacement period for maintenance parts. Also resets the

count value after replacing the maintenance parts.

Press the print key.

* The count value on each ejection location is displayed

1 Select the item for which the count value is to be reset.

* The selected item is highlighted.

* To reset the count values for all ejection locations, press ALL on the

touch panel.

2 Press the print key. The count is cleared.

To exit this maintenance item without changing the current setting, press

the stop/clear key. The screen for selecting a maintenance item is

Straight ejection count

Reversed ejection count

Duplex tray ejection count

Chapters

Table of Contents